PRIMACY
LAMINATION
35
Maintaining the dust filter of the lamination unit
The dust filter is located below the lamination unit. This filter can get dirty over time. We recommend cleaning it once a year or after 10,000 cards, depending
on your work environment.
1
Unplug the lamination module and disconnect it from the printing module.
2
Put the lamination module back and locate the dust filter.
3
Remove the filter by pulling it up and sliding to release it completely.
4
Once the filter has been removed from its place, take one of the cleaning wipes supplied by Evolis.
5
Clean the filter by brushing it with the wipe on each side.
6
To put it back, insert it in place (groove facing you) and push it down until it clicks into position.
7
Plug it in again and reconnect the lamination module to the printing unit.
3
4
6
5
2
