Annexe B
Smart Card Contact Station
Introduction
Dualys printers with a Smart Card Contact Station are called Dualys Smart printers. The working mode
of a Dualys Smart printer is identical to that of a Dualys printer.
The Smart Card Contact Station of the Dualys Smart enables the chips to be programmed to the ISO
7816-2 standards.
Location of the contact station
The Contact Station is a module installed in the factory on
Dualys Smart printers.
The Contact Station is positioned over the path of the cards and
before the print head. To contact the Station, the chip card is
placed under it and is pushed up.
The programming sequence of a chip is always carried
out before the card is printed.
Only use chip cards conform to ISO 7816-2.
Never print on the chip.
Card orientation
Chip cards must be installed in the card feeder so that the chip is downwards, as shown below:
44
1.
Remove the feeder from the printer as
shown.
