evoheat Evo315-C, Инструкция по установке и эксплуатации

Страница: 15 / 21

info@evoheat.com.au
1300 859 933 www.evoheat.com.au
Evo315-C Manual
Page 14
Temperature parameters
R01 Hot water target temp setting value 38~75 55
R03
Heating, the lower temp return difference setting
value
1~20 5
R04
Whether enable the electric heater independent
setting value
0 / 1 0 0-Disable / 1-Enable
R05 Electric heating temp setting value 30~90 55
R06 Electric heat startup delay 0~450min 200min
R07
Whether the electric heater replace the
compressor
0 / 1 1 0-No / 1-Yes
R08
Electric heater replace the compressor ambient
temp
-20~10 -5
R09 Electric heater zero delay startup ambient temp 0~30 5
R10 Electric heater delay startup ambient temp 10~40 25
R12 The compressor force to shutdown temp -30~-5 -15
R14
Replacement value of external heat source target
temperature
10~60 45
R15
The compressor limit temp under high ambient
temp
55~80 78
R17
Whether enable the top temp sensor for
controlling the compressor startup
0 / 1 0 0-Disable / 1-Enable
R18
Heating, the top temp return difference setting
value
1~20 1
R19 The compressor shutdown ambient temp 1 30~90 65
R20 The compressor shutdown ambient temp 2 30~90 55
Timing parameters
L01 Whether enable the vacation mode 0 / 1 0 0-Disable / 1-Enable
L02 The vacation mode: Year 0~99Y 0
L03 The vacation mode: Month 0~12M 0
L04 The vacation mode: Day 0~31D 0
L05 Whether enable the timing on/off function 0 / 1 0 0-Disable / 1-Enable
L06 Timing on period 1: Hour 0~23h 0
L07 Timing on period 1: Minute 0~59min 0
L08 Timing off period 1: Hour 0~23h 0
L09 Timing off period 1: Minute 0~59min 0
L10 Timing on period 2: Hour 0~23h 0
L11 Timing on period 2: Minute 0~59min 0
L12 Timing off period 2: Hour 0~23h 0
L13 Timing off period 2: Minute 0~59min 0
Switch status parameters
S01 Remote on/off switch CL / OP Close
S03 Low pressure protection switch CL / OP Close
S04 High pressure protection switch CL / OP Close
S05 Time-lapse signal switch CL / OP Open
S06 External setting switch CL / OP Open
Temperature status parameters
T01 Ambient temp -30~93 /
T02 Water tank bottom temp -30~93 /
T03 Water tank top temp -30~93 /
T04 Coil temp -30~93 /
T05 Suction temp -30~93 /
T06 Solar control temp -30~93 /
T10 App/wire controller display temp -30~93 /
T20 Enter parameter over-range protection times 0~65535 /
T21 Memory chip EEPROM storage times 0~30000 /