1300 859 933
www.evoheat.com.au
Evo315-C Manual
Page 9
6.2.4 Setting & Checking the Target Temperature
In the standby or running interface, press
or
once to check the target temperature of the outlet water.
Press
or
again to change the target temperature.
After making changes to the desired temperature, press
to confirm or
to cancel, then return to the previous
screen.
If the keypad is left idle for 5 seconds, the controller will exit the menu automatically and apply any changes that were
made.
Example: The target temperature is 40°C, the actual outlet water temperature is 18°C.
6.2.5 Hydroboost Setting
Also known as the Electric heater,
the Hydroboost setting allows
higher levels of hot water to be
produced. When there are high hot
water usage requirements (such as
guests staying), this function may
come in useful.
The Hydroboost setting can be turned on when the
unit is heating or in standby mode.
Press
once to turn on Hydroboost and press
again to shut it off. When activated,
will
light up on the main display.
6.2.6 Force Defrost
In the extremely unlikely circumstance of the unit icing up (for example, if the unit was installed inside with
no ventilation), this function can be applied.
When the unit is off, press and hold
for 10 seconds to enable the forced defrosting function. The defrosting
symbol will light up. Press
for 10 seconds again to exit the forced defrosting function.
Содержание Evo315-C
Страница 1: ......
