48
01-2019 5505 00
s
oftvEND
paramEtErs
c
oNfiguratioN
coDE
It displays the
softvEnd
configuration code.
The configuration code specifies the
heights
softvEnd
shall reach for each tray.
H
omE
positioN
It sets up the
softvEnd
home position.
The home position is expressed in cm from
the tray placed at the highest height.
99 indicates the lowest limit stop (lower part
of the refrigerated box)
s
Etup
by
tray
You can enable and define - for each tray
- at which height (in centimetres from 0 to
99) from the first tray on the top to place
softvend.
The machine displays - for each tray - at
which height to place softvend
tray
number
position
(cm)
enable
1
8
on
2
25
on
3
40
on
4
53
on
5
70
on
6
95
on
7
99
on
If you modify the values (height in centi-
metres), softvend will immediately move
to the value you have entered; in doing so,
you can make sure that the values you have
entered correspond to what you wish.
-0 is generally referred to the tray placed at
the highest height.
According to the number of trays of the
machine, it may happen that the first tray
on the top is not corresponding with 0.
-99 indicates the lowest limit stop (home
position by default).
s
Etup
by
sElEctioN
You can enable and define - for each selec-
tion - at which height (in centimetres from 0
to 99) from the first tray on the top to place
softvend.
The machine displays - for each selection -
at which height to place softvend
selection
number
position
(cm)
enable
11
8
on
12
8
on
13
8
on
17
8
on
20
25
on
21
25
on
35
40
on
If you modify the values (height in centi-
metres), softvend will immediately move
to the value you have entered; in doing so,
you can make sure that the values you have
entered correspond to what you wish.
-0 is generally referred to the tray placed at
the highest height.
According to the number of trays of the
machine, it may happen that the first tray
on the top is not corresponding with 0.
-99 indicates the lowest limit stop (home
position by default).
