30
01-2019 5505 00
FILLER MENU
STATISTICS
All the machine operation data are stored in
total and relative counters that can be reset
without losing total data.
p
riNt
This function is intended to print the data
that have been stored for the machine op-
eration.
Connect an RS232 serial printer having
9600 baud rate, 8 data bits, no parity, 1
stop bit with the serial port on the button
board in order to print all statistics, i.e:
totals
1 - counter by selection;
2 - counter by band;
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
rElativE
1 - counter by selection;
2 - counter by band;
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
The machine code, the printing date and
time, the software release, the operator
code and the installation date will be also
printed.
To print, act as follows:
- connect the printer;
- confirm to start printing
D
isplay
The function is intended to sequence-dis-
play the same data you can obtain by print-
ing statistics.
Press the Enter key to sequence-display
the following data:
total counters
1 - counter by selection;
2 - counter by band;
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
relative counters
1 - counter by selection;
2 - counter by band;
3 - failure counter
4 - coin mechanism data
5 - photocell error counters
6 - motor errors
7 - safety temperature exceeded (models
with food management enabled only)
D
ElEtE
Statistics can be reset for relative counters
either globally (all types of data) or selec-
tively for:
-selections
-failures
-coin mechanism errors
-photocell errors
-motor errors
-temperature exceeded
Press the Enter key to display a confirma-
tion message.
Press the Enter key to reset statistics.
