EVOC TRAIL PRO 10, Инструкция по эксплуатации

Страница: 5 / 41

09 08
EN EN
RESULT OF IMPACT DAMPING
Average measurement results of the impact damping test for the four different conditionings
including classification according to Level 1 and Level 2.
LEVEL
1
LEVEL
2
T+ T-
IMPACT DAMPING VALUES
BACK ENVIRONMENT MOISTURE
Level 1:
no single value exceeds 24kN and is on aver-
age less than 18kN
Level 2:
no single value exceeds 12kN and is on aver-
age less than 9kN
ASSEMBLY | COMPONENTS
The back protector only provides protection of the areas covered by it in accordance with the
EN 1621-2:2014 standard. This protection is only guaranteed when the EVOC backpack with
integrated back protector is in the right and intended position.
CORRECT FIT | ADJUST BACKPACK
Put on the backpack with shoulder strap,
chest strap and hip belt loosened. Place the
height-adjustable and flexible hip belt on the
hip bone and close the hook and loop fastener.
For height adjustment, see Figure 2. Now
close the hip belt plug fastener and pull the
hip belt until it fits snugly.
Tighten the shoulder straps, making sure that
you tighten the backpack only until the padded
back section lies vertically and horizontally
centred against the back. The hip belt must
not move up from the hip.
Adjust the height-adjustable chest strap
such that it is above the chest. Close the plug
fastener of the chest strap and tighten it such
that the backpack fits as tightly and snugly as
possible on the back. Make sure that straps
and belts with buckles and plug fasteners are
closed and fit tightly to avoid getting caught on
something!
1
3
5
4
6
7
9
8
2
1
2
3
X X X X
1 | Backpack volume
2 | Carrier back section incl.
protector
3 | Shoulder strap adjustable
4 | Height adjustable chest strap
5 | Chest strap plug fastener
6 | Flexible hip belt
7 | Hip belt plug fastener
8 | Hip belt strap - adjustable
9 | Liteshield plus back protector (internal)