background image

 

Product Introduction 

 

- 4 - 

NPC-8210 

 

HDD/redundant power supply; 

3. NPC-8210-03 supports up to 24 1000Mbps LAN ports/provides one standard PCIE 

8X slot/2 x 3.5-inch drawable HDD/redundant power supply; 

4. NPC-8210-05 supports up to 40 1000Mbps LAN ports/2 x 2.5-inch drawable 

HDD/redundant power supply; 

5. NPC-8210-06 supports up to 24 1000Mbps LAN ports/2 x 3.5-inch drawable 

HDD/single power supply; 

6. NPC-8210-07 supports up to 24 1000Mbps LAN ports/2 x 3.5-inch drawable 

HDD/redundant power supply; 

7. When the chassis is used with EF-EIO-043NPC-01 IO board, the chassis front 

panel ETH-A silk screen printing corresponds to LAN1 of EF-EIO-043NPC-01, 

and IPMI silk screen printing corresponds to LAN2 of EF-EIO-043NPC-01; 

8.When the chassis is used with EF-EIO-043NPC-02 IO board, the chassis front 

panel ETH-A silk screen printing corresponds to LAN1 of EF-EIO-043NPC-02, 

and ETH-B silk screen printing corresponds to LAN2 of EF-EIO-043NPC-02; 

9. 2.5-inch SAS hard drive is not recommended for NPC-8210; 

10. Part number of RJ45 serial port of NPC-8210 redirection converter cable: 

2360-005711 (optional); 

11. It is not recommended to use onboard RAID function for NPC-8210. 

Содержание NPC-8210
















































Отзывы: