Operating Instructions
NPC-8210
- 27 -
SAS Setup Interface (Advanced -> SAS Configuration)
Table 9 SAS Setup Interface
Option
Description
Onboard SAS Oprom/Driver
Enable or disable onboard SAS function.
Boot Setup Interface
Table 10 Boot Setup Interface
Option
Description
Quiet Boot
Enable or disable bootup LOGO function
CSM parameters
Set up boot mode menu
Table 11 Boot Mode Setup Interface
Option
Description
Boot Option filter
Set up boot mode
Legacy only: Boot 32-bit system, DOS or 64-bit
Legacy system
UEFI only: Boot 64-bit UEFI system
Launch PXE OpROM policy
PXE boot mode selection
Automatic Power-up Mode and PXE Boot Enabled Interface
Table 12 Automatic Power-up Mode and PXE Boot Enabled Interface
Option
Description
ethA PXE Boot
Enable or disable PXE boot funciton
Restore AC Power Loss
Set up the system status upon reboot after the PC is
disconnected from AC power.
PowerOff: The system is powered off.
PowerOn: The system is powered on automatically.
Last State: It returns to the status before power loss.
