Operating Instructions
- 20 -
NPC-8210
vcore1_value=0.968V
vcore2_value=0.760V
v_5_value=4.888V
v_3_3_value=3.120V
v_12_value=11.880V
v_bat_value=3.200V
set_sys_threshold
set_cpu1_threshold
set_cpu2_threshold
Set temperature alarm threshold. On CLI interface,
input set_XXX_threshold, threshold1, threshold2
and threshold3. When the actual temperature is
above threshold1, the buzzer gives alarm for once;
when the actual temperature is above threshold2, the
buzzer gives alarm for twice; when the actual
temperature is above threshold3, the buzzer gives
alarm for three times;
cli>set_sys_threshold 60 70 80
cli>set_cpu1_threshold 60 70 80
cli>set_cpu2_threshold 60 70 80
Set the threshold values according to the actual
needs. It is not appropriate to set the values too high
or too low. The former may make the alarm
ineffective, and the latter may lead to frequent alarm.
Usually default settings are used.
get_sys_threshold
get_cpu1_threshold
get_cpu2_threshold
Check current temperature alarm threshold values.
For example, input on CLI interface
cli > get_sys_threshold
sys_threshold
：
80 80 80
reset_system
Reset system, and input on CLI interface
cli>reset_system
start_system
Start system, and input on CLI interface
cli>start_system
