Assembly and Maintenance
- 32 -
NPC-8210
5.3.2 Removing the Motherboard
1. Open the chassis cover, and remove the riveted assembly of wind shield;
2. Remove the trapezoid converter board linked with IO board;
3. Remove the memory reinforcement brackets;
4. Loosen the ten M3 screws and seven hex studs, then you can remove the
motherboard.
5.4 Installation and Removal of HDD
NPC-8210 is used with NET-2814VD2N(B)-01 motherboard, and has two 3.5-inch
drawable HDD. Use the key in the accessory kit to open the lock on the HDD case,
grasp the handle on the case and pull it outward to take out the 3.5-inch HDD from
the chassis, so as to replace or install HDD.
NPC-8210 is used with NET-2814VD2N(B)-01 motherboard
