Assembly and Maintenance
NPC-8210
- 33 -
NPC-8210 is used with NET-2814VD2N(B)-02 motherboard, and supports four
2.5-inch drawable HDDs as full configuration. Loosen the captive screws on the HDD
handle, grasp the handle and pull it outward to take out the four 2.5-inch HDD from
the chassis, so as to replace or install HDD.
NPC-8210 is used with NET-2814VD2N(B)-02 motherboard
5.5 Installation and Removal of Power Supply
5.5.1 Installing the Power Supply
When NPC-8210 is equipped with single power supply, use six M3 sunkhead screws
to fasten the power bracket onto the chassis, place the power supply inside the chassis,
use three sunkhead #6-32*1/4 screws to fasten the power supply onto the bracket,
then use two sunkhead #6-32*1/4 screws to fasten the tail end of the power supply
from bottom of the chassis (The power supply has internal bracket) If tthe power
supply has no internal bracket, use two sunk head #6-32*1/4 screws to fasten the
power supply to the internal bracket, then use two M3 sunk head screws to fasten the
tail part of power supply from bottom of the chassis.
