EVGA 37062314 Скачать руководство пользователя страница 18

Страница: 18 / 161

EVGA Z390 DARK (131-CS-E399)

- 18 -

6. 24-pin ATX power connector

The main power for the motherboard is located on the right side of the board

and parallel to the PCB; this is also described as a “90 degree / right-angle”

connector (See Page 40 for more specifics to the connector itself, and associated

wiring/pinouts). The 24-pin connector IS directional and the connector needs

the tab on the socket to line up with the release clip located on the 24-pin

connector from the power supply. This connector pulls the bulk of the power

for all components; other connectors, such as CPU +12V EPS, PCIe (video
card AND motherboard sides), have been added to reduce the load and increase

longevity due to wiring and trace limitations.

7. Dual 8-pin EPS Connector

The +12V EPS are comprised of 90 degree right-angle dual-dedicated power

inputs for the CPU (See Page 41 for more specifics to the connector itself, and

associated wiring/pinouts). Carefully choose the correct power cable by

consulting with the installation manual for your power supply. This connector

is designed only to work with an EPS or CPU cable. System builders may make
the mistake of plugging in a PCIe 8-pin or 6+2-pin connector, which will

prevent the board from POSTing and possibly short or damage the board.

Although the cables appear similar, they are wired differently and attaching a

PCIe cable to an EPS connector may cause damage to the motherboard.
Alternatively, if no power cable is connected or detected, the system will not

POST and will hang at POST code “C.”

8. Supplemental PCIe 6-pin Power Connector

There is a 6-pin PCIe connector at the bottom of the motherboard (See Page 40
for more specifics to the connector itself, and associated wiring/pinouts). This

connector provides dedicated power to the PCIe x16 slots, augmenting the

+12V power provided by the 24-pin and the GPU directly.
This is optional for a single card solution, but is recommended for SLI, CFX,

and dual-processor video cards.

9. Intel

SATA 6Gbit/s Ports

The Intel

Z390 PCH has a 6-port SATA 3/6 Gbit/s controller (See Page 48

for specifics on the connectors). This controller is backwards compatible with
SATA and SATA II devices, and supports SSDs, HDDs and various types of

optical devices (CDROM, DVDROM, BD-ROM, etc). The controller also

Содержание 37062314


































































































































































Результаты поиска

Содержание 37062314

Отзывы:

Похожие инструкции для 37062314

Бренды по названию

Популярные бренды

EVGA 37062314, Руководство пользователя

Результаты поиска

Содержание 37062314

Отзывы:

Похожие инструкции для 37062314

Бренды по названию

Популярные бренды