EQT-1616-3G-C-C
EQT 12G/3G/HD Router
Page 15
4.2.1.2. To change the IP address of the components via Serial connection
For the EQT:
1. Connect a DB-9 cable to the DEBUG/SERIAL port on the rear of the router
2. Set connection parameters as follows:
Speed
115200
Data
8-bit
Parity
None
Stop Bits
1 bit
Flow Control None
3. When prompted, log in with login/password combination
customer/customer
4. Once the configuration menu is displayed, select the Network Setup menu
5. Follow the on-screen instructions to set the IP address, subnet mask, gateway, and broadcast
address
6. Make sure to select the option to Save and Exit when changes are complete
7. Wait 30 seconds for changes to be applied
8. Reboot the EQT for changes to take effect
For the Control Panel:
1. Connect a DB-9 cable to the SERIAL port on the rear of the router
2. Set connection parameters as follows:
Speed
115200
Data
8-bit
Parity
None
Stop Bits
1 bit
Flow Control
None
3. Once the configuration menu is displayed, select the Network Setup menu
4. Follow the on-screen instructions to set the IP address, subnet mask, gateway, and broadcast
address
5. Make sure to select the option to Save and Exit when changes are complete
6. Wait 30 seconds for changes to be applied
7. Reboot the EQT for changes to take effect
NOTE: The device must be rebooted in order for network changes to take
effect.
Содержание EQT-1616-3G-C
