evertz EQT-1616-3G-C, Руководство пользователя

Страница: 80 / 102

EQT-1616-3G-C-C
EQT 12G/3G/HD Router
Page 68
Figure 8-6 : WinSetup - Panel Configuration
Each button can be programmed by selecting the button and then editing the functions in the Key section
of the dialog box. Each panel should also be given a name for later identification;
Panel 2402
is used in
this example. The Q-LINK address will be allocated automatically by the program, but can be edited if
required. The default parameters control how the panel will function at power up. In this example the
panel will always control DST-1 to start with. Now add any further panels that the system will need.

NOTE: The checkbox for ‘Use Ethernet’ must be checked to control the panel
over the Ethernet network.

NOTE: For versions that are equipped with a local control panel, an Ethernet
panel configuration must be defined using the type CP-2402E.
6. Download: Click the ‘Download’ button on the main screen (or, alternatively, use
System >
Download to router
) to transfer the setup data to the router.

NOTE: The configuration for the EQT can only be downloaded over Ethernet and
not serially.