evertz 5010, Инструкция по эксплуатации

Страница: 36 / 108

Model 5010 Time Code Master Manual
Page 4-2
Revision 3.1.1
OPERATING INSTRUCTIONS
STATUS:
Displays a status screen on the VCG that summarizes the current operational
modes of the 5010. Pressing
SHIFT + STATUS
displays the firmware version on
the character generator screen.
VCG MODE:
Initiates VCG window select mode and highlights the selected window. Use the
arrow keys to move the window, use the
VCG ON/OFF
key to turn the window on
or off. Press the
VCG MODE
key again to select the next VCG window. Press
the
CLEAR
key to return to the normal VCG display mode.
VCG ON/OFF:
Turns the character generator ON and OFF. When in the VCG window select
mode, the
VCG ON/OFF
key is used to turn individual windows ON and OFF.
SETUP:
Initiates SETUP mode and displays the on screen programming menu. Pressing
the
SETUP
key again exits the SETUP mode.
SELECT:
When in the SETUP mode, the
SELECT
key is used to choose items from within
a drop down menu or sub-menu.
Í Î Ï Ð
:
When in the SETUP mode, the arrow keys are used to move between various
items in the menu system.
When in the VCG window select mode, the arrow keys are used to position
individual windows on the screen. See also section 4.3.1.
When not in either the SETUP or VCG window select modes, the arrow keys are
used to position all the windows on the screen. (See also section 4.3.2)
4.1.2. Overview of the Shifted Key Functions
When the
SHIFT
key is held down the standard meanings of many of the keys are modified.
Throughout this manual shifted keys are referred to as
SHIFT + STATUS
for example. When you see
this it means to hold the SHIFT key while pressing the other key. The following combinations provide
an overview of the main shifted functions.
SHIFT + SETUP:
Pressing the
SETUP
key while holding down the
SHIFT
key will cause the unit to
enter the Engineering Setup menu.
SHIFT + STATUS:
Displays firmware revisions on the character generator and the front panel.
Pressing the
CLEAR
key or
SHIFT + STATUS
will remove this screen.
SHIFT + JAM:
Initiates or cancels the Continuous Jam sync mode of the generator.
SHIFT + DISPLAY:
Shows the extended displays on the front panel.
4.1.3. Status Indicators
There are eight status indicators that show operational status at a glance.
VITC GEN ON:
Indicates that VITC generator is active (Model 5010-VITC only)