EPN5230 / EPN5210
48
【
DDNS Setting
】
DDNS Enable
: Check this box to enable the DDNS function.
Service
: You can either apply for a host name from
EverFocus
or
other DDNS server providers
. If you
choose the EverFocus DDNS server, you can obtain a free host name from EverFocus
by following the
steps below:
From EverFocus: To obtain a free host name from EverFocus, type a desired host name in the
Device
domain name
field (there is no need to enter username / password).
From other DDNS server providers: To obtain a domain name from one of the three DDNS server
providers, you have to register your name with the provider first, and then select the provider and fill
in the required information. Please refer to the specific DDNS company’s website for further
information.
Device domain name:
Type the registered domain name from the DDNS server provider.
Username
/
Password:
Type the login account of your DDNS server provider.
Click the
Save
button on the bottom-right to save the settings.
Note:
1.
In order to support the full functionality of the camera, you must open the port numbers (80,
554, 443) on the router for remote access to the IP camera. This function is available on most
routers in the market and is often known as “Port Forwarding”. To set up Port Forwarding,
please consult the manual of the router.
2.
In certain router models, it is possible that you will not be able to access the camera using
DDNS while inside the router’s network. Please try using a PC located outside of your
router’s network.
Default Ports on All EverFocus IP Cameras:
HTTP: 80
RTSP: 554
HTTPS: 443
