EPN5230 / EPN5210
55
draw the desired Motion Detect area, the area will be marked in purple. Up to 4 Motion Detect
areas can be configured.
You can remove the configured Motion Detect area by clicking the
Clear All
button. Click the
Save
button on the bottom-right to save the settings.
7.4.3.2.
Parameter Config
You can enable motion detection alarm transmitting to the e-mail address or the FTP server, and
set up schedules to active alarm functions using this page.
【
Linkage
】
Upload Email:
Check the box to enable transmitting the alarm notification to the mail server. To
configure Email settings, see
7.3.3. Port Setting
.
FTP Upload:
Check the box to enable transmitting the alarm notification to the FTP server. To
configure FTP settings, see
7.3.3. Port Setting
.
Snapshot:
Check the box to enable taking a snapshot to the FTP server when an event occurs.
Record:
Check the box to enable recording to the FTP server when an event occurs.
【
Time Set
】
To add a schedule to send alarm notification to specified e-mail address or FTP server:
1. Select a day (Sunday ~ Saturday) from the
Day
drop-down list to configure the schedule.
2. Click the
Add Task
button and select a Start/End time.
3. Repeat steps 2 as many times as you need to add more schedules.
4. Click the
Save
button on the bottom-right to save the settings.
You can also use the
Copy To
function to copy the alarm schedule of current day to the other day.
For example, if you want to copy the alarm schedule of Tuesday to Wednesday and Thursday:
