14
2.8
Before the First Use
Before the first use, please set as the following steps:
1. Set the address, date and time of the finger vein controller
2. Setting of alarm signal
3. Setting of door
4. Set IP address
2.9
Tips to Capture a Finger Vein
2.9.1
Insert Your Finger into the Finger Vein Reader Terminal
Insert a finger into the deep end of the finger vein reader terminal (the finger vein
reader allows 0 to 45 degrees of finger rotation).
2.9.2
Hold Finger for a Few Seconds
When the machine is processing, please hold the finger for a couple of seconds until
the message appears on the OLED display or the buzzer sounds.
2.10
Routine Maintenance
Oil stain, food residues and other stains will not affect the regular collecting of the
controller. The finger vein controller is designed exclusively for industry and it can work
in relatively hostile environment, for example, over cold or over heated.
Please clean the surface of the finger vein scanner regularly:
Wipe the controller and the surface of the finger vein scanner with dry or wet
clothe or soft paper towel. Apply glass cleaner with PH6~8 can remove some dirt if
necessary.
Please avoid using cleaner with PH < 4.5. It might damage the controller and
plastic part.
Do NOT pour cleaner or any other liquid on the controller surface or machine. It
causes power shortage.
