Ever POWERLINE 33 10k, Инструкция по эксплуатации

Страница: 42 / 46

Instruction manual for POWERLINE 33 series UPS
2010/06/22
www.ever.eu
42
COMMENTS ON OPERATION
NOTE! This product is intended for commercial and industrial use
in the second environment. To prevent interference emissions, it
may be necessary to apply additional measures of prevention or
limitation of the system (PN-EN 62040-2).
NOTE! The battery module contains no end-user serviceable
elements.
•
Damage to the guarantee seal in turn results in the automatic voidance of the
device’s guarantee.
•
All repairs must be carried out exclusively by qualified service personnel
licensed appropriately with the applicable laws.
•
The unit may operate below expectations, if the receiver device requires high
impulse power. In practice, even if the average power of the receiver device is
within the permitted level of the UPS, the device can turn the UPS off. This
results from the high instantaneous power collected by the receiver device,
much above the power rating of the UPS and leading to an overload and UPS
shut down.
•
It is recommended that the batteries are serviced and controlled by competent
personnel who are familiar with that problem and ensuring the required
measures of prevention.
•
The batteries should be replaced with batteries of the same type and number of
cells or modules.
WARNING! Protect the batteries against fire – explosive!
WARNING! Do not open the batteries, and protect them against
damage. Spilt electrolyte is harmful to the eyes and skin, and could
be toxic.
WORK WITH POWER GENERATORS
POWERLINE 33 units are ON-LINE class devices that synchronise voltage
with the mains. The unit has been designed to tolerate voltage fluctuations and
changes in the frequency compared to 50 Hz benchmark (see technical parameters
table). When working with a power generator, frequency changes are variable over
time and directly depend on changes of the load. If the generator voltage frequency
changes exceed the tolerance level, the power supply unit will see it as an irregularity
and switch to the appropriate operation mode, according to the rules of its operation
described above.