Ever POWERLINE 33 10k, Инструкция по эксплуатации

Страница: 29 / 46

Instruction manual for POWERLINE 33 series UPS
2010/06/22
www.ever.eu
29
CONNECTING THE UPS
Connection Terminals
Figure 2: Connection terminals with protection
AC INPUT
- input terminals
L1, L2, L3 - subsequent input phase line
BYP
- BYPASS phase lines
MAIN - main phase lines
NEUTRAL
- neutral lines
N - BYPASS input line N
N - main input line N
N - output line N
AC OUTPUT
- output terminals
L1, L2, L3 - subsequent output phase line
DC INPUT
- input terminals of the battery pack (optional)
+ - red pole
N - neutral pole
- - blue pole
- protective earthing point, connection of a cable with an eyehole connector
using M6 screw
To connect, screw the ends of every cable to the connectors. Protect the cables
against being pulled out with the clips attached to the holders below the connection
terminals.
Wire sizes specified in the wiring guidelines should be used. Conductor ends should
be finished with metal sleeves.
The installation must enable the disconnection of the power supply from the mains.
NOTE! The UPS should only be connected by qualified and
authorised personnel who are licensed in line with the applicable
laws.