Ever Power Systems POWERLINE DARK 33 10kVA Скачать руководство пользователя страница 7

Страница: 7 / 51

EVER POWERLINE DARK 33 10 - 40 kVA UPS Operating Manual

www.ever.eu

Technical Assistance, phone: +48 61 6500 400

2019-06-10 14:36 Type 01

CAUTION!

Before disconnecting the power, no electric connectors or

metal elements inside the UPS may be touched.

CAUTION!

All openings and places allowing access to the UPS unit’s

electric connectors must be secured with their relevant covers. Failure to

do so may put at risk the health and life of individuals touching such

connectors or damage the device.

CAUTION!

Severe burns may result from the high current occurring

during short circuits.

CAUTION!

There are no user-serviceable parts inside the UPS.

CAUTION!

POWERLINE RT 33 UPS units are not intended to operate

directly with medical equipment, life-supporting equipment or any other

equipment that may have effect on health.

B) Installation information and requirements

CAUTION!

POWERLINE RT 33 UPS units may only be installed and

maintained by suitably qualified service technicians.

CAUTION!

Before installing the UPS, OHS regulations with regard to

electric devices operating with voltage up to 1 kV must be consulted.

CAUTION!

Before connecting the leads or making connections inside

the UPS or in the electric installation, make sure the electric terminals

and leads are not live.

CAUTION!

The UPS may only be connected to a power supply system

operating with specified rated voltage and with an earthing connector.

The mains to which the UPS is connected must be protected against

overload and short circuit.

Содержание POWERLINE DARK 33 10kVA




















































Результаты поиска

Содержание POWERLINE DARK 33 10kVA

Отзывы:

Похожие инструкции для POWERLINE DARK 33 10kVA

Бренды по названию

Популярные бренды

Ever Power Systems POWERLINE DARK 33 10kVA, Инструкция по эксплуатации

Результаты поиска

Содержание POWERLINE DARK 33 10kVA

Отзывы:

Похожие инструкции для POWERLINE DARK 33 10kVA

Бренды по названию

Популярные бренды