120
121
EPS Foam
Replacement Parts (cont.)
Canopy
Lower Anchor
Connector Assembly with
Quick Connectors™
Harness System
Accessory Base
Care and Cleaning
•
DO NOT
lubricate or immerse in water the LATCH connectors,
the buckle, or any other part of this child restraint, unless
rinsing is permitted, as stated on the back of the buckle for
your restraint.
• Plastic and metal parts may be wiped clean with mild soap and
water and dried with a soft cloth. Do not use abrasive cleaners
or solvents.
• Take care not to damage any labels.
• The harness can be wiped clean with mild soap and water.
Allow harness to air dry.
• Machine wash the seat pad separately in cold water, delicate
cycle. Tumble dry 10 to 15 minutes on low heat.
•
NEVER
use child restraint without the seat pad.
• To protect the child restraint from damage caused by weather,
rodents, and other elements common to garages, the
outdoors, and other storage locations, remove the seat pad
and thoroughly clean the restraint and pad prior to storage.
Take care to clean in the areas where crumbs and other debris
tend to accumulate.
To help protect the
vehicle upholstery, place a
towel beneath and behind
the child restraint.
T
IP
!
T
IP
!
