100
101
SensorSafe
™
Technology
Questions? Comments?:
Visit us at:
www.evenflogold.com
or
www.evenflogold.ca
Or call ParentLink at: 1-800-233-2229 in the (U.S) and (Canada), .
This device meets the requirements of SAE J3005.
FCC Certified:
Chest Clip Model:
SOSR2, FCC ID: 2ABS2-SOSR3
Receiver Plug Model:
SS2, FCC ID: 2ABS2-SS2
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference. (2) This device must accept any interference
received, including interference that may cause undesired operation.
Industry Canada (IC) Certified - Model: SOS, IC ID: (Chest Clip)
11740A-SOSR3 and (Receiver) 11740A-SS2. This device complies
with Industry Canada License-exempt RSS standard(s). Operation is
subject to the following two conditions: (1) this device may not cause
interference, and (2) this device must accept interference, including
any interference that may cause undesired operation of this device.
WARNING!
Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation.
GENERAL INFORMATION ABOUT SENSORSAFE
TM
(CONT.)
USING SENSORSAFE 2.1
GENERAL INFORMATION ABOUT SENSORSAFE
TM
(CONT.)
This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance
with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Chest Clip:
RF warning statement:
The device has been evaluated to meet general RF exposure
requirement. The device can be used in portable exposure
condition without restriction.
Receiver Plug:
FCC Radiation Exposure Statement:
This equipment complies with FCC radiation exposure limits set
forth for an uncontrolled environment. This equipment should
be installed and operated with minimum distance 20cm between
the radiator & your body.
