Evenflo LiteMax DLX, Руководство пользователя

Страница: 25 / 61

48 49
• ALWAYS be sure that the lower anchor connectors
are fully engaged onto the vehicle lower anchor
bars by pulling hard on the lower anchor connector
assembly harness. If they are not totally engaged,
the lower anchor connector assembly system will not
secure your child restraint. Serious injury or death
may result.
• DO NOT use this child restraint if it moves more than
2.5 cm (1 in.) side-to-side or front to back at the
vehicle belt path. Serious injury or death may result
from loose installation. If you cannot tightly secure
the child restraint, try again or move it to another
location.
• The carrier MUST be locked firmly into the base.
Check by lifting up on the carrier.
• NEVER use this child restraint in the forward-facing
position.
Installing the Convenience Base with the
Lower Anchor Connector Assembly (cont.)
WARNING!
DEATH or SERIOUS
INJURY can occur.
Recline Indicator
Indicateur d’inclinaison
1.8-9 kg (4-20 lbs)
9-15.8 kg (20-35 lbs)
Before you begin, be sure the vehicle is on level ground.
Remove lower anchor connectors, see p. 95-96. Place
base rear-facing on an approved vehicle seat location.
Using your full weight,
push the base into the
vehicle seat and check
the level indicator.
Note: NEVER allow white indicator line to appear in
red zones.
Blue: 1.8 - 9 kg
(4 - 20 lbs)
Green: 9 - 15.8 kg
(20 - 35 lbs)
Part Number : LB0087
Title : LABEL-CARSEAT-LEVEL INDICATOR-SONTI
Size : 139.767 mm x 72.662 mm
Color : 100% black PMS186 C, PMS 306C Blue, PMS 354C Green
(green outline does not print)
Material: permanent pressure sensitive - UV coating
Location :
LABEL INFORMATION
Recline Indicator
Indicateur d’inclinaison
1.8-9 kg
(4-20 lbs)
9-15.8 kg
(20-35 lbs)
White indicator line
MUST be in the correct
color zone for your child.
Installing the Convenience Base with the
Lower Anchor Connector Assembly (cont.)
1
Before installing the base, if you
are using the load leg, you will
need to unfold the leg, install the
base, then extend the load leg.
Please follow steps on p. 40-43.