Evenflo LiteMax DLX, Руководство пользователя

Страница: 39 / 61

76 77
Locking Clip
installed
properly
13 mm
(0.5 in.)
Check your vehicle owner’s manual to identify which vehicle belt
system is in your vehicle. If your vehicle is model year 1996 or
newer, it likely has a vehicle belt system that can be locked when
tightened, and will not require use of a Locking Clip.
Consult your vehicle owner’s manual before installing a
locking clip.
If your vehicle requires a Locking Clip, please call ParentLink at
1-800-233-5921 (U.S.) or 1-937-773-3971 (Canada), or
01-800-706-12-00 (Mexico) to obtain a Locking Clip and
instructions on how to install and use it.
• Remove Locking Clip from vehicle seat belt when not used with a
child restraint, or the vehicle seat belt will not properly restrain an
adult or child. Serious injury could occur.
Install Locking Clip (not
included), if necessary.
If your vehicle was built prior to
model year 1996, and has a lap/
shoulder belt that is equipped with
an emergency locking retractor
(ELR) AND sliding latch plate, you
MUST use a Locking Clip.
WARNING!
DEATH or SERIOUS
INJURY can occur.
Installing the Carrier
WITHOUT the Convenience Base (cont.)
6
Securing the Child in the Carrier
Place the baby into the carrier. Baby’s bottom and
back should be flat against the seat. If there is a gap,
baby will not be comfortable.
1
Squeeze headrest
adjustment button
and lower headrest
to the closest
position AT or JUST
BELOW the child’s
shoulders.
CHECK to make
sure headrest is in a
locked position by
pushing down.
PLACE AT A
RMPIT LEVEL
PUSH