![background image](http://html.mh-extra.com/html/britax/kidfix-xp/kidfix-xp_user-instructions_2814019001.webp)
08
01
02
03
04
10
12
14
13
07
KIDFIX XP
KIDFIX XP SICT
15 to 36 kg
(~4 to 12 years of age)
User instructions
GB
www.britax.eu
IT
No. 2000010039 13/07
05
06
11
Belt guide (bright red)
Release knob
XP-SICT (only KIDFIX XP SICT)
Belt holder (dark red)
ISOFIX insert guides
ISOFIX fastening points (vehicle)
ISOFIT locking arms
01
02
03
04
05
06
07
Backrest
Seat cushion
ISOFIT settings key
Safety button
Storage compartment
08
09
10
XP-PAD
11
Adjusting handle of the headrest
12
13
14
Removing the seat cover
1.
Moving the headrest of the vehicle seat into the top
position.
2.
Unhook the cover hook 19 on the rear of the backrest.
3.
Remove the top part of the cover and fold it forwards to
the seat surface.
4.
Unhook the cover hook
19 on the front of the backrest.
5.
Pull the cover off of the seat surface.
Removing the headrest cover
6.
Unhook the cover loop 20 on the rear of the backrest.
7.
Unhook the cover hook 19 on the front of the backrest.
8.
Pull off the cover of the headrest 22 .
►
The cover can now be washed. Please observe the
instructions on the washing label of the cover:
Re-fitting the cover
Proceed in reverse order to put on the cover.
5. CARE AND MAINTENANCE
19
20
19
19
22
09
2. INTRODUCTION
We are delighted that our
KIDFIX XP / KIDFIX XP SICT
can safely accompa-
ny your child through a new stage in its life.
In order to protect your child correctly, the
KIDFIX XP/
KIDFIX XP SICT
must always be used and installed as described in these instructions.
If you have any further questions regarding its use, please feel free to contact us:
BRITAX RÖMER
Kindersicherheit GmbH
Blaubeurer Straße 71
D-89077 Ulm
Germany
T.: +49 (0) 731 9345-199/-299
F.: +49 (0) 731 9345-210
www.roemer.eu
BRITAX EXCELSIOR
LIMITED
1 Churchill Way West
Andover
Hampshire SP10 3UW
United Kingdom
T.: +44 (0) 1264 333343
F.: +44 (0) 1264 334146
www.britax.eu
These instructions use the following symbols stated below:
Symbol
Keyword
Explanation
DANGER!
Risk of severe personal injury
WARNING
!
Risk of minor personal injury
CAUTION!
Risk of material damage
TIP:
Useful notes
Instructions that follow a set sequence are numbered.
Example:
1. Press the button...
16
15
Belt guide colours
For better differentiation, the two vehicle seat
belts are highlighted in different colours. The di-
agonal seat belt 16 in dark red and the lap belt
15 in bright red. The colour of the belt guides
on the child safety seat follows the same colour
scheme.
4. USE IN THE VEHICLE
Please observe the instructions for using children's restraining systems in the operating
instructions of your vehicle.
The seat can be used in vehicles with ISOFIX anchoring systems
(see type list) and in vehicles with a 3-point belt.
Please find the information on the seats approved for child safety seats of the weight classes 15 to
36 kg in the operating instructions of your vehicle.
The
KIDFIX XP / KIDFIX XP SICT
is approved for two different methods of installation:
Symbol
Installation type
Approval type
Section
with the ISOFIT locking arms on the
ISOFIX fastening points in the vehi-
cle. Observe the vehicle type list.
semi-universal
a)
9A
with the vehicle's 3-point seatbelt
universal
9B
a)
This means that the child safety seat may only be used in vehicles that are listed in the
vehicle type list enclosed. This type list is consistently kept up to date. The latest version
can be obtained from us or from www.britax.eu / www.roemer.eu.
You can use your child safety seat as follows:
In the direction of travel
Yes
Against the direction of travel no
1)
with 2-point belt
no
with 3-point belt
2)
Yes
with ISOFIX fastening points
(between seat surface and
backrest)
Yes
on front passenger seat
Yes
3)
on outer rear seat
Yes
on centre rear seat (with
3-point belt)
Yes
4)
1) Use is permitted on a rearward-facing vehicle seat (e.g. in a van or minibus) only
if the vehicle seat is also approved for use by adults. The seat may not be in the area of effect
of an airbag.
2) The safety belt must be approved to ECE R 16 or a comparable standard (see test label on
belt with an "E" or "e" in a circle).
3) If there is a front airbag: Slide the vehicle seat a long way back and refer to any instructions
in vehicle owner's manual.
4) Cannot be used if the vehicle seat is equipped with only a 2-point belt.
15–36 kg
3. Certification
BRITAX RÖMER
Child safety seat
Testing and certification
In accordance with ECE* R 44/04
Group
Body weight
KIDFIX XP
KIDFIX XP SICT
II+III
15 to 36 kg
*ECE = European Standard for Child Safety Equipment
The child safety seat has been designed, tested and certified according to
the requirements of the European Standard for Child Safety Equipment (ECE
R 44/03). The seal of approval E (in a circle) and the approval number are
located on the orange approval label (sticker on the child safety seat).
DANGER!
This approval will be invalidated if you make any modifications
to the child safety seat. Only the manufacturer is permitted to
make modifications to the child safety seat.
WARNING!
Use the KIDFIX XP / KIDFIX XP SICT exclusively for secur-
ing your child in your vehicle. It is in no way suitable as a
seat or toy in the home.
DANGER!
Never secure your child or the child safety seat with a 2-point
belt. If you secure your child in the child seat with only a
2-point belt, then in the event of an accident this may cause
serious injuries to your child, possibly resulting in death.
PAGE I
6. DISASSEMBLY AND DISPOSAL
Please ensure that you only use the original BRITAX RÖMER replacement seat
covers, as the seat cover is an integral part of the child safety seat and fulfils im-
portant functions to ensure the smooth operation of the system. Replacement seat
covers are available from your dealer or from an ADAC office.
• The cover can be removed and washed with a mild detergent in the delicates
programme of the washing machine (30 °C). Please observe the instructions
on the washing label of the cover.
• The plastic parts and the XP-PAD can be cleaned with a soap sud. Do not use
any caustic cleaning agents (such as solvents).
DANGER!
The child seat must not be used without the seat cover.
1. PRODUCT OVERVIEW
1.
Operate the release key of your vehicle seat buckle
2.
Open the XP-PAD 11 on the Velcro fastener and
remove the diagonal belt 16 .
3.
Open the dark red belt holder 03 by pressing back-
wards the key on the belt holder 03 and unthread-
ing the diagonal belt 16.
Only for installation type A (ISOFIT):
4.
To release the ISOFIT fastening, release the green
safety button 08 and the red release button 07 first
on the one and the on the other side opposite on
another.
►
The child safety seat can now be removed.
DANGER!
the child safety seat must always be
secured when it is in the vehicle, even if no child is
being transported.
03
DISPOSAL:
Please observe the waste disposal regulations in your country.
Disposal of packaging
Container for cardboard boxes
Seat cover
Residual waste, thermal utilisation
Plastic parts
According to the labelling in the
corresponding container
Metal parts
Container for metals
Belt straps
Container for polyester
buckle and tongue
Residual waste
16 11
08
07
REMOVAL:
UNFASTENING YOUR CHILD:
1.
To unfasten your child, use the release button of your vehicle seat buckle.
TIP!
The XP-PAD can remained applied for easier use on the diagonal
belt of your vehicle, the diagonal belt must be retensioned before every
journey; see: Section
10 step 12
[page II].
140227_KIDFIX_XP_KIDFIX _XP_SICT_GB.indd 1
27.02.2014 14:00:41