ASSEMBLING YOUR STROLLER
2
7
ASSEMBLING YOUR STROLLER
8
Slide the front wheel assembly
M
over the front frame leg
N
until the locking tab
O
locks into place with an audible click.
Pull on each front wheel assembly to make sure it is locked
securely. Repeat for other side.
Note:
To remove each swivel wheel, press locking tab
O
and
slide the wheel off the leg.
N
M
Bring the parent’s console
R
up to the parent’s handle
B
.
Gently pull out one end of the console and guide the hole
S
over the post
T
. Repeat with the other end of the parent’s
console.
Step on the rear brake levers
B
to lock the rear wheels on
the stroller.
To release the brakes, lift up on the brake levers.
USING YOUR STROLLER
1
Pull canopy hoop
A
forward to extend canopy.
Push canopy toward handle to close.
5
4
O
5
6
A
L
Turn the stroller upside down.
Hold the rear wheel/axle assembly so the brake levers
L
face
toward the handle and console.
Slide the brake housings onto the stroller
A
until they lock
into place with audible clicks.
Pull upward on the rear wheel/axle assembly to make sure it
is locked securely.
Turn stroller right-side up on its wheels. Insert the canopy
support tubes
P
into the canopy hinges
Q
on the stroller
until they lock into place with audible clicks.
Pull upward on the canopy tubes to make sure they are
locked securely.
P
Q
Bring child’s tray
U
up to front of stroller. Gently guide
child tray’s posts
V
into holes in stroller
W
until they lock
in place with audible clicks. Pull on the child’s tray to make
sure it is locked in place.
4
P
Q
W
U
V
A
B
R
T
B
S
