EVCO S.p.A.
Vcolor 679/689
| Installer manual ver. 1.0 | Code 144VC679E104
page
32
of
70
8.2
Heating cycle
When this cycle is selected for the first time, the following screen will be displayed, suggesting the preloaded values; if any changes are
made to these values, they will be suggested the next time the cycle is selected.
Before starting up the desired cycle, the values of the temperature setpoint, humidity setpoint and fan speed can be changed; if a timer
is not set to end the cycle after the pre-determined time, the cycle will continue indefinitely.
Selecting fan speed (e.g. with 10 speeds)
Heating setpoint
Selecting the timer
Press the
key to start up the desired cycle. Hold down the
key for a few seconds to interrupt the cycle.