EVCO S.p.A.
Vcolor 679/689
| Installer manual ver. 1.0 | Code 144VC679E104
page
29
of
70
If, instead, the description of the recipe is pressed, a screen with a keyboard will open.
Pressing on the table will give access to the single screens where changes can be made to each phase (which make up a RETARDING-
PROOFING cycle (blocking, holding, re-awakening, proofing and baking delay) or a PROOFING cycle (re-awakening, proofing and baking
delay):
Retarding-proofing
Proofing
Press the arrows at the top of the display to move backwards and forwards between the phases; press the arrow at the bottom of the
display to go back to the table. Select the different fields (temperature, humidity and duration) and change their values using the
numerical keypad.
CHANGE END OF CYCLE TIME
(for retarding-proofing only)
CHANGE TEMPERATURE SETPOINT
CHANGE HUMIDITY SETPOINT
