EVCO S.p.A.
Vcolor 679/689
| Installer manual ver. 1.0 | Code 144VC679E104
page
15
of
70
Retarding-proofing
Home screen (E12=1)
Proofing Home screen (E12=0)
To switch the device on, press the central key
on the stand-by screen; to switch the device off, press the
key on
the lower part of the Home screen.
N.B.:
•
If the power supply has been cut off long enough to cause a clock error (RTC alarm), it will be necessary to reset the
date and time.
•
If the display remains in the Home screen for longer than 10 minutes with no cycle running, it will automatically go
back to the stand-by page.
4.
From the settings key
on the stand-by screen, enter the GENERAL SETTINGS – DATE/TIME menu to set the current
date and time; it is also possible to set either the EUROPEAN or US format in this screen.
EUROPEAN FORMAT
US FORMAT
5.
From the settings key
on the stand-by screen, enter the GENERAL SETTINGS – LANGUAGE menu to set the language;
the available languages are given below.
6.
From the settings key
on the stand-by screen, enter the SERVICE – PARAMETER SETTINGS menu and configure the
device. The complete list of parameters is given in section 14 “PARAMETERS”.