________________________________________________
_______________________________________________
Instruction Manual MM850341 ed.01a
___________________________________________43____________________________________________
Fig. 12.1.2: Graph view toolbar
The following buttons are displayed on the toolbars.
View graph on actual data window
Pressing this button a new window, containing the graph of the active data table, is displayed.
Preference dialog
On preferences menu command you can set :
Instrument
(not available for IRtec Rayomatic)
- Tag name ( max 7 characters ).
- Emissivity ( from 0.10 to 1.00 ).
- Temperature scale ( IPTS 68 or ITS90 )
- Units ( °C, °F or K ).
- Decimal point ( 1 or 0.1 ).
- Alarms value and check box ( on/off ).
- Sampling time and total time of PC log.
Header
Lines ( max 10 ).
Footer
Lines ( max 10 ).
- Top, header, left, right, bottom and footer distance in inches.
- Enable/Disable Grid and colour.
- Enable/Disable Centre table horizontally
Graph
- Autoscale or Lower and Upper Limits.
Select decimal point
(0 or 1)
Select engineering units
( °C, °F or K ).
Enable/Disable alarms
not available for IRtec Rayomatic.
Copy into a new file
Use this command to copy selected data onto a new file.
This command is unavailable if there are no data currently selected.
Copy into an open file
Use this command to copy selected data onto an opened file.
It will appear a list of current opened files to be selected.
This command is unavailable if there are no data currently selected.
Move into a new file
Use this command to move selected data onto a new file.
This command is unavailable if there are no data currently selected.
