________________________________________________
_______________________________________________
Instruction Manual MM850341 ed.01a
___________________________________________39____________________________________________
Edit (graph setting)
Here you can select the parameters for the 2 traces (mathematical function,
color) , display the grid, and zoom the graph.
Traces Settings
You can change these parameters only if acquisition is stopped.
Select the mathematical function.
Switch the selector to on position to enable the trace for display.
Change the trace color.
Zoom
Switch the selector to on position to enable the function. The software will continue
the data acquisition but it didn’t refresh the graph.
Graph refreshing will be repristined when the function is disabled.
Design a rectangular area on the graph using the mouse. It will be zoomed.
ReadOut
Switch the selector to on position to enable the function. The software will continue
the data acquisition but it didn’t refresh the graph.
Graph refreshing will be repristined when the function is disabled.
Two cursor will appear. Delimit the zoom area using them. Press the “EnterRead”
key to zoom the graphic.
NOTE: You cannot activate the function Zoom and ReadOut at the same
time.
Statistics
Here you can enable / disable the statistics for the .
You can change the statistic mode only if acquisition is stopped.
