Installation and Setup
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
7
2.
INSTALLATION AND SETUP
This section will guide you through the installation and setup process, including basic configuration
and a system test to ensure that all components are working properly. These steps are
MANDATORY
to run the VoIP²ALL, unless otherwise indicated.
After completing this section your Gateway is functional for basic operations. You may choose to
make further configurations. For details, see
Advanced Configuration
on page 19.
2.1.
INSTALLATION OVERVIEW
Perform the following steps to install and setup your system:
1)
Check the items delivered in your package - see
Check the Package Items
on page 7.
2)
Install SIMs - see
Hardware Installation
on page 7.
3)
Connect LAN cables, antennas and power supply - see
Connecting Cables
on page 11.
4)
Install the PC management application using the CD provided - see
Software Installation
on page
11.
5)
Power up the Gateway
.
6)
Perform basic setup - see
Basic System Setup
on page 12.
7)
Make basic system configurations - see
Basic Configuration
on page 14.
8)
Test the Gateway -
Basic System Test
on page 16.
9)
(Optional) Make advanced system configurations - see
Advanced Configuration
on page 19.
2.2.
CHECK THE PACKAGE ITEMS
Make sure that your package contains the following components before installation:
Main Hardware Device - The VoIP²ALL Gateway.
Quick Installation Guide - Brief installation explanations.
Software Installation CD - Gateway Manager CD for MS-Windows Management Application.
Includes the User Manual file and additional auxiliary utilities.
Cellular Antennas
LAN Connection Cable
RS-232 Serial PC Comport (COM) connection cable (RJ-45 to RS-232 COM). This facilitates
debugging and direct access to the configuration files. This is referred to as the ‘Com Cable’ in
this manual.
Input: 110/240 V AC 50-60 Hz, Output: power supply cable
2.3.
HARDWARE INSTALLATION
This section describes how to install the VoIP²ALL Gateway Hardware.
