Advanced Configuration
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
49
Min/Max Call
- The minimum and maximum length of the calls. A call will last a random
amount of seconds within this range.
Min/Max Freq
- The minimum and maximum length of time between the calls. The time
between calls is a random amount of seconds in this range.
Note: Min Freq must be above 60 seconds
Start Time
- The time to start the calls. (i.e. hh:mm)
End Time
- The time to stop the calls. (i.e. hh:mm)
Note: The end time must be after the start time as the period does not extend to the following day.
9)
Click
Save.
4.7.10.
CONFIGURING TEST SMS
Test SMS is a function to randomly send SMS from the cellular ports to predefined destinations,
allowing you to test incoming SMS to the cellular ports.
SIMs that use this profile will operate like any other SIM until
Start time
.
At
Start time
the port that uses this SIM will send SMS randomly to one of the numbers in the
Test
SMS
profile using one of predefined messages.
To configure Test SMS profile:
1)
On the Main Toolbar, click
Virtual SIM
.
2)
Select
SIM Servers
tab.
3)
Click
Synchronization
.
4)
Select the
Test SMS
tab.
5)
In the
Server
field, select an index (profile).
6)
Click
Add Number
.
In the
Test SMS Profile
list,
Destination(not Save)
appears.
7)
Enter the number to send the test call to.
You can add multiple numbers by repeating step 6 and 7.
8)
Click
Add Content
.
In the
Test SMS Profile
list,
Content(not Save)
appears.
9)
Enter the message to send.
You can add multiple messages by repeating step 8 and 9.
10)
Define the following parameters:
Min/Max Freq
- The minimum and maximum length of time between the messages. The time
between messages is a random amount of seconds in this range.
Start Time
- The time to start the messages. (i.e. hh:mm)
End Time
- The time to stop the messages. (i.e. hh:mm)
Note: The end time must be after the start time as the period does not extend to the following day.
11)
Click
Save.
