Advanced Configuration
VoIP²ALL 8 - 16 - 24 Channel Gateway User Guide
www.eurotech-communication.com
41
C1 - the SIM Server card number in the SIM server
S1 - the SIM socket number in the card
100\100 - units remaining\original amount of units
192.168.0.31 - the IP Address of the SIM Server
8)
To unselect the cell, click it again.
9)
Click
Save
.
10)
Select the
General
tab.
11)
In
SIM Load Type,
define how the Gateway selects the next SIM when the current SIM has
finished its work.
Select one of the following:
Random
- The SIM to work is selected randomly.
Max Balance
- The SIM with the highest balance.
Min Balance
- The SIM with the lowest balance.
First
- The next available SIM on the list.
Last
- The last available SIM on the list.
1)
Click
Save
.
Swapping SIMS in Call Duration every few calls
In Call Duration mode you can define the port to swap the SIM every few calls before reaching the
daily limit.
Each time the SIM is activated, the Gateway selects a random number within the range defined in
the Max and Min Call Count parameters.
This is the amount of calls the SIM makes during its activation time before being replaced by the next
SIM on the list.
To swap SIMs:
1)
From the Main Toolbar, click
Virtual SIMs
.
2)
Select the
Profile
tab.
3)
Select a profile.
4)
Define the following parameters:
Max Call Count
Min Call Count
5)
Click
Save
.
6)
Assign the profile to a SIM. See
Assigning a Profile to a SIM
on page 37.
7)
Define the
Call Duration
list. See above.
4.7.4.3.
USING THE SECONDARY IP
If the SIM Server is working with a private IP address behind NAT, and the Gateway accesses the SIM
Server from the public IP, you need to configure the secondary IP so the Gateway can contact the
SIM Server.
