96
EN
button pressed is followed by a buzzer
sound.
Switching the Appliance On
Switch the hob on by pressing the ON/
OFFbutton
. All heater displays will
show a static “
0
” and the bottom right
dots blink. (If a cooking zone is not
selected within 20 seconds, the hob will
automatically switch o
ff
).
Switching the Appliance O
ff
Switch the hob o
ff
at any time by
pressing
.
The ON/OFF button
always has
priority over the switch-o
ff
function.
Switching the Cooking Zones On
Press the heater selection button that co-
r responds to the heater you wish to use.
A static dot will be shown on the selected
heater display and the blinking dots on
all other heater displays will no longer
illuminate.
Select the temperature setting by using
the increase heat setting button
or
decrease heat setting button
. The
element is now ready to use. For fast boil
times, select the desired cooking level,
then press the “
P
” button to activate the
Boost function.
Switching the Cooking Zones O
ff
Select the element you want to switch
o
ff
by pressing the heater selection key.
Using the
button, turn the temperature
down to “
0
”. (Pressing the
and
buttons simultaneously also turns the
temperature to “
0
”).
If the cooking zone is hot, “
H
” will be
displayed instead of “
0
”.
Switching all Cooking Zones O
ff
To switch all the cooking zones o
ff
at
once, press the key
.
In stand-by mode, a “
H
” will appear on
all cooking zones which are hot.
Residual Heat Indicator
The residual heat indicator indicates
that the glass ceramic area has a
temperature that is dangerous to touch.
After switching o
ff
the cooking zone,
the respective display will show “
H
”
until the corresponding cooking zone
temperature is at a safe level.
Smart Pause
Smart Pause, when activated, reduces
the power of all burners that have been
switched on.
If you then deactivate the Smart Pause,
the heaters will automatically return to
the previous temperature level.
If the Smart Pause is not de-activated,
the cooktop will switch o
ff
after 30
minutes.
Press
to activate Smart Pause. The
power for the activated heater(s) will
reduce to level 1 and “
II
” will appear at
all displays.
Press
again to deactivate Smart
Pause. “
II
” will disappear and the heaters
will now run at the level previously set.
Safety Switch-O
ff
Function
A cooking zone will automatically switch
o
ffi
f the heat setting has not been
modifi
ed for a specifi
ed duration of
time. A change in the heat setting of the
cooking zone will reset the time duration
to the initial value. This initial value
depends on the selected temperature
level, as shown below.