EuroLite LED KLS-60 WW, Руководство пользователя

Страница: 22 / 32

00127688, Version 1.0 22/32
INSTALLATION
Overhead rigging
WARNING! Risk of injury caused by falling objects
Devices in overhead installations may cause severe injuries when crashing down. Make sure
that the device is installed securely and cannot fall down. The installation must be carried out by
a specialist who is familiar with the hazards and the relevant regulations.
The device may be fastened to a
truss or similar rigging structure
using the Omega holder. The device
must never be fixed swinging freely
in the room.
1 The rigging structure must
support at least 10 times the weight
of all fixtures to be installed on it.
2 Block access below the work
area and work from a stable platform
when installing the device.
3 Use rigging hardware that is
compatible with the structure and
capable of bearing the weight of the
device.
Please refer to the
“Accessories” section for a list of
suitable rigging hardware.
Screw a clamp via a M10 screw and
self-locking
nut onto the Omega
holder.
Insert the quick-lock fasteners of the
Omega holder into the respective
holes on the housing. Tighten the
quick-lock fasteners fully clockwise.
4 Secure the device with a safety bond or other secondary attachment. This secondary safety attachment
must be sufficiently dimensioned in accordance with the latest industrial safety regulations and
constructed in a way that no part of the installation can fall down if the main attachment fails. An
appropriate eyelet is mounted on the device for fixation of the safety rope. Fasten the safety rope in such
a way that, in the event of a fall, the maximum drop distance of the device will not exceed 20 cm.
5 After installation, the device requires inspections periodically to prevent the possibility of rot, deformation
and looseness.
(1)
Omega-holder
(2)
Clamp
(3)
Safety-rope
(4) Quick-lock fastener
1
2
4
3