00127688, Version 1.0
26/32
Stand-alone mode
Automatic mode
In automatic mode, 12 different show programs are available that run at an adjustable speed.
1
Press the
MENU
button so many times until the
menu structure
is indicated in the display. Use
UP
and
DOWN
to select
AUTO
. Confirm 2 x with the
ENTER
button.
2
Use
UP
and
DOWN
until the display shows
Program
. Confirm with the
ENTER
button.
3
Use
UP
and
DOWN
to select the number of the desired program. Confirm with
ENTER
.
4
Use
UP
and
DOWN
until the display shows
Speed
. Confirm with the
ENTER
button. The display
indicates menu item running speed.
5
Use
UP
and
DOWN
to adjust the running speed of the program from
01
(slow) to
99
(fast). Confirm with
ENTER
.
Sound control
Via the integrated microphone the unit can perfectly reproduce the 12 show programs to the rhythm of the
music (sufficient bass provided).
1
Press the
MENU
button so many times until the
menu structure
is indicated in the display. Use
UP
and
DOWN
to select
SOUND
. Confirm 2 x with the
ENTER
button.
2
Use
UP
and
DOWN
to select the number of the desired program. Confirm with
ENTER
.
3
Use the rotary control
MICROPHONE SENSITIVITY
to adjust the microphone sensitivity to the sound
volume. In case of missing sound signal, the LEDs are either switched off after 5 seconds or hold the
most recent light effect. This function can be found under the menu item
SETTINGS > SOUND
.
Individual dim mode
In the dim mode
MANUAL
each of the LED spots (
Spot 1- Spot 4
) can be individually adjusted for
brightness. Select
Strobe
to adjust the speed of the strobe effect for all spots at the same time.
1
Press the button
MENU
so many times until the
menu structure
is indicated in the display. Use
UP
and
DOWN
to select
MANUAL
. Confirm 2 x with the
ENTER
button.
2
Select the desired spot (
Spot 1- Spot 4
) using the
UP
and
DOWN
buttons. Confirm with
ENTER
.
3
Use the
UP
and
DOWN
buttons to adjust the desired brightness.
4
Confirm with
ENTER
. Now the brightness of the next spot can be adjusted.
5
The setting of the strobe speed is the final menu item. Use
UP
and
DOWN
to select the desired strobe
speed
STROBE
. Confirm with
ENTER
.
6
Use the
UP
and
DOWN
buttons to adjust the desired strobe speed from
001
(slow) to
099
(fast) or
000
(no flashing).
7
Confirm with
ENTER
.
Master/slave operation with several light sets
Several devices may be interconnected (max. 32). Then all slave units can be synchronized and controlled
with the master unit without the need for a DMX controller.
The devices must be set to the corresponding
operating modes.
1
Configure all slave units before connecting the master unit. For this, press the
MENU
button so many
times until
SLAVE
is indicated in the display. Confirm with the
ENTER
button. The display now indicates
SLAVE
.
2
Confirm with
ENTER
. The display will indicates SLAVE in red until control signals are being received
from the master unit, then SLAVE will light in green.
3
Connect the DMX output of the master unit to the DMX input of the first slave unit. Then connect the
DMX output of the first slave unit to the DMX input of the second slave unit, etc. until all units have been
connected in a chain. Make sure the master unit is the first in the chain. Do not connect a DMX controller
to the DMX input of the master unit.
4
Select the desired show program or dim mode at the master unit. The interconnected light sets will now
operate in synchronously.
Содержание LED KLS-60 WW
Страница 1: ......
Страница 2: ...00127688 Version 1 0 2 32...
