EuroLite LED KLS-60 WW, Руководство пользователя

Страница: 24 / 32

00127688, Version 1.0 24/32
Wireless DMX transmission with QuickDMX
The device features an alternative DMX input for a QuickDMX receiver (sold separately). This connector
allows for wireless transmission of DMX control signals to the device. The connector is designed as a USB
port which provides the required 5 V operating voltage for the receiver. With QuickDMX devices, extensive
cabling between the DMX controller and the device is not required.
USB port connection:
POWER SUPPLY
The device uses an auto-range power supply that accepts input voltages between 100 und 240 volts.
1 Connect the device via the mains cable to a grounded mains socket. Thus the unit is switched on.
2 To switch off the unit, disconnect the power plug.
3 Do not connect the unit to the mains voltage via a dimmer. For a more convenient operation, use a mains
outlet which is switchable.
4 The jack POWER OUT allows for power supply of further devices. To interconnect several devices,
connect the jack POWER OUT to the input POWER IN of the next unit until all units are connected.
Matching power cables are available as accessories. In this manner, up to 8 devices can be linked at
230/240 input voltage and up to 4 devices at 110/115 input voltage.
OPERATION
The built-in control panel of the unit features four operating buttons and a display which shows all operation
statuses. After connecting the unit to the mains it requires a short initialization process and is then ready for
operation. The light set may be controlled via IR remote control or a DMX controller. The operating modes
can be selected by means of the display and the control buttons.
Operating buttons
Button Function
MENU Selects the operating mode or returns to the initial screen.
UP
Selects the next menu item or increases values when modifying.
DOWN Selects the previous menu item or decreases values when modifying.
ENTER Activates a value to be modified or saves a value when modifying.