manualshive.com logo in svg

EUROCOM Monster 3.0, Руководство пользователя

Поделиться
Скачать
EUROCOM Monster 3.0 Скачать руководство пользователя страница 180

Modules

7 - 44 Intel® Rapid Storage Technology

7

Enabling Intel Smart Response Technology

1.

Run the 

Intel® Rapid Storage Technology

 application.

2.

Click 

Enable acceleration

 under 

Performance > Smart Response Technology

 

(

note that you will at least 5MB of free unpartitioned and unallocated space on the SSD 

otherwise the Smart Response Technology item will not appear

).

3.

Select the SSD to be used as a cache device.

4.

Select the size from the SSD to be allocated for the cache memory (any remaining 
space on the SSD can be used for data storage using the simple data single-disk 
RAID 0 volume that is automatically created).

Figure 7 - 33

Intel® Rapid 

Storage 

Technology - 

Performance 

Enable 

Acceleration

Содержание Monster 3.0










































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды