Euro-Pro Shark CORDLESS V600Z, Руководство пользователя

Страница: 6 / 14

Fig. 4
Charging
Light
Indicator
CHARGING INSTRUCTIONS
1. Connect the charger plug to the charging jack or hole on the back of the sweeper.
Plug the charging adapter into the wall outlet. (120V., 60Hz.) Use only TechWorld
Charger AD-0920-UL. (Fig. 4)
4
OPERATING INSTRUCTIONS
Release
Button
Fig. 3
4. The telescopic tube is designed to adjust to the height that is comfortable for all
users. To adjust the height, simply push down the release button on the
telescoping pole and pull the upper handle to adjust to a comfortable height for
using. (Fig. 3)
2. This cordless sweeper is powered by Ni-Cd batteries. Before first use, they must
be charged for a minimum 20 hours.
3. When recharging the unit, the "On/Off" switch must be in the "OFF" position.
4. The charging light indicator on the top of the sweeper will illuminate to indicate
that the sweeper is properly charging.
5. To recharge, repeat step #1 above. Charging times will vary depending upon the
amount of usage between charging cycles.
NOTE:
If, when you place the sweeper to recharge and the charging indicator light
does NOT illuminate, then press the On/Off button once to turn the sweeper off. The
charging indicator light should now light up.
NOTE:
Peak performance may only be realized after the unit has been charged and
discharged two (2) or three (3) times.
IMPORTANT:
To maintain peak performance of your cordless sweeper, it is
recommended that the unit be fully discharged, then completely re-charged at least
once a month.
CAUTION:
Use only the adaptor supplied with the sweeper
CAUTION:
Do not clean the sweeper while unit is charging.
CAMBIO DEL CEPILLO GIRATORIO, ENGRANAJES Y ESCOBILLA DE
GOMA
1. Quite el tubo de extensión del cabezal eléctrico de la barredora.
2. De vuelta el cabezal eléctrico teniendo cuidado para no encenderlo accidentalmente.
3. Quite la cubierta del cepillo.
4. Presione en la traba de los engranajes y levántelos para removerlos.
(Fig. 13 y Fig. 14)
Levante
Fig. 14
21
INSTRUCCIONES DE USO
Fig. 16
Fig. 15
Fig. 13
Traba
Engranajes
Pestañas de
los engranajes
5. Levante el extremo del cepillo y el tope fuera de la ranura. (Fig. 15)
6. Separe el cepillo del cojinete y deslícelo por debajo de la correa para removerlo.
(Fig. 16)
7. Inserte el cepillo nuevo colocando primero el extremo opuesto al de la correa en el
cojinete. (Fig. 16)