EUPA ITZV6, Руководство пользователя

Страница: 42 / 47

3-19
[NOTE]
If you forget your password, or you want to cancel your password, you can do the steps If you forget your password, or you want to cancel your password, you can do the steps If you forget your password, or you want to cancel your password, you can do the steps If you forget your password, or you want to cancel your password, you can do the steps If you forget your password, or you want to cancel your password, you can do the steps
as the following: as the following: as the following: as the following: as the following:
(1) Password forgotten:
i. Turn off the system.
ii. Short JP3 at Pin 2-3 for a few seconds to clear CMOS.
iii. Set the JP3 back to Pin 1-2.
iv. Power on the system.
(2) Clear Password:
Clear your password by key in the password you installed
before, then go to password setting to press ENTER twice.
Set Supervisor / User Password Set Supervisor / User Password
Set Supervisor / User Password Set Supervisor / User Password Set Supervisor / User Password
P
assword prevents unauthorized use of your computer. If you set a password, the
system prompts for the correct password before boot or access to setup. The main
difference between Supervisor Password and User Password is the privilege. Be-
cause Supervisor Password allows you to modify all CMOS setup but User pass-
word only some of them.
Their steps all as follows:
1.
Highlight the item Set Supervisor Password / Set User Password on the main
menuand press ENTER.
2.
The password dialog box will appear.
3.
If you are installing a new password, carefully type in the password. Press
ENTER after you have typed in the password. If you are deleting a password
that is already installed just press ENTER when the password dialog box appears.
4.
The system will ask you to confirm the new password by asking you to type it in
a second time. Carefully type the password again and press ENTER, or just press
ENTER if you are deleting a password that is already installed.
5.
If you typed the password correctly, the password will be installed.
CMOS Setup Utility