CMOS Setup Utility
IDE HDD Block Mode
If your IDE hard drive supports block mode (most new drives do), select Enabled
for automatic detection of the optimal number of block read / write per sector the drive
can support.
The optional are:
Enabled(Default)
, Disabled
KBC input clock
Set the KBC input clock.
The optional are:
8MHz (Default)
, 12MHz
POWER ON Function
Set the power on function mode for power on.
The optional are: Password, Hot Key, Mouse Move / Click,
Any Key(Default)
,
BUTTON ONLY, Keyboard 98
KB Power ON Password
If Power On Function is set Password, this option let you set KB Power On Password.
Press <Enter> and enter your password.
Hot Key Power ON
This option let you choose Power ON Key from <Ctrl-F1> to <Ctrl-F12>.
The optional are: Ctrl-F1
(Default)
, Ctrl-F12
Onboard FDC Controller
Select Enabled if your system has a floppy disk controller (FDC) installed on the
system board and you wish to use it. If you install an add-in FDC or the system has no
floppy drive, select Disabled in this field.
The optional are:
Enabled(Default)
, Disabled
3-13
