Connectors:
Connectors:
Connectors:
Connectors:
Connectors:
1. Panel Connector:
-POWER LED
ATX Power LED (3-pins)
-SPEAKER
Chassis Speaker (4-pins)
-HDD LED
HDD LED (2-pins)
-RESET
Reset Switch (2pins)
-PWR ON
ATX Power Switch (2pins)
2. Power Connector
Connect the 20-pin ATX power supply cable to this power connector. Make sure
the right plug-in direction and the power supply is off before connecting or
disconnecting the power cable.
Remark:
We suggest that users use 5 V STB and power source current
should be over 0.7A, otherwise it will affect system boot up.
2-7
Hardware Installation
