EN 24
TECHNICAL SPECIFICATIONS
Table of appliance errors.
These errors appear on the cooking top display.
Error code
Description
Possible causes
Solution
C, E, C flashing, E
flashing or
- symbol
If the display in
one of the cooking
zones shows one
of these symbols,
an intervention
has occurred or
is occurring in the
system’s basic
configurations.
Problems or changes
detected to the
system’s basic
configurations.
Contact the
authorised service
centre, specifying the
error code.
E2
Excessive
temperature on the
cooking zone.
Overheated pot.
Allow the system
to cool down,
decreasing the power
or removing the pot.*
E3
Malfunction due to the
use of inappropriate
cookware materials.
Pots of
inappropriate
material or
possible loss of
magnetic properties at
higher temperature.
Use pots of a suitable
material or replace
them.*
E4, E5, E6, E7, E8, E9,
EA, EC, EH,
Hardware fault
Hardware errors
detected
Contact the
authorised service
centre, specifying the
error code.
No display / Function
Voltage or touch
control error.
Faulty electrical
connection or faulty
component.
Contact the
authorised service
centre, specifying the
error code.
u
Pot not detected
Inappropriate
cooking pot
Use a suitable pot.
Refer to the section of
the manual on suitable
recipients.*
Er31, Er47, Er22, Er20
or segments on the
display lighting up
cyclically
Touch control fault
Touch control error
detected
Contact the
authorised service
centre, specifying the
error code.
