ETC Power Control Processor, Руководство по настройке

Страница: 51 / 64

Timeclock 45
Appendix B
Timeclock
Programming examples
The following pages contain step by step instruction on programming common system timed events.
Astronomical event
An astronomical event is based on the sunrise and sunset. This example describes how to turn on lights
30 minutes before sunset and turn them off again at sunrise.
1: Within the Arch Setup menu, select the Timeclock menu, and make sure Timeclock is set to
“Enabled”.
2: Press [Down] to advance to the Schedule Events option.
3: Press [Enter] and advance to the “Event Number” selection. Use the numeric keypad or the
[Up] or [Down] buttons to enter the event number. For this example, the event number is
“1”.
4: Using the same menu selection techniques, set the
following options:
• The “Next Time” field auto-populates based on the
settings programmed within the Timeclock Settings
menu.
• See
Menu Flow Chart
on
page 38
for the full menu
flow.
As soon as you exit this Schedule Events menu, this
astronomical event will be active indefinitely.
Schedule Events
Event Number: 1
Action: Preset
Space: 1
Preset: 1
Recurrence: Everyday
When: Before
Sunrise
Time: 0h30m
Next Time:
(5:56am)