ETC Power Control Processor, Руководство по настройке

Страница: 38 / 64

32 Power Control Processor Configuration Manual
Arch Control Menu
The “Arch Control” menu provides you access to the setup and
timing of the control system presets and sequences.
Presets
• Preset: Select the preset within the space you want to work with. Each space contains presets
numbered between 1 and 64.
• Activate/Deactivate:
- When the current selected preset is NOT active, “Activate” will be displayed for selection. With
“Activate” selected, pressing [Enter] ( ) activates the current selected preset. Any other
presets playing in the space will be deactivated.
- When Deactivate is selected, pressing [Enter] ( ) deactivates the current selected preset.
• Record: Pressing [Enter] ( ) records the current selected preset using the current levels of all of
the circuits within the selected space. Levels can be DMX, sACN, manually set levels from the user
interface, or a combination of sources.
- Fade Time: Determines the length of time it will take for a preset to fade up and down.
Sequences
The “Sequence” menu provides you with the tools to start and stop a sequence, edit the steps of a
sequence, and configure the sequence mode.
• Space: Select the space to which the selected sequence applies. Your available choices will
depend on the configured spaces within the rack.
• Sequence # Active or Sequence Inactive: Displays the status of the sequence within the space.
• Start/Stop or Activate/Deactivate: Start or stop the sequence when the “Seq Mode” is “Single”
or “Loop”. When the “Seq Mode” is set to “Bounce”, this setting changes to Activate /
Deactivate.
• Seq Mode: Determine the sequence mode by selecting “Bounce”, “Single”, or “Loop”.
- Bounce Mode is similar to a preset; it can be “Activated” or “Deactivated”. When it is
activated, it runs through the sequence steps in order of recorded presets for the space, similar
to a fade up. When it is deactivated, it runs through those steps in reverse order, similar to a
fade down. A “Bounce” sequence is useful for powering on and off equipment that needs to
be turned on or off in a particular order, like sound amplifies and mixers.
Arch Control
1 Presets
2 Sequences
3 Start Timed Hold
4 Start Holiday Shutoff
5 Start Indefinite Hold
Presets
Space: 1
Preset 12 Active
Preset#: 2
Activate
Record
Fade Time:
0min 2sec
The “Presets” menu provides you with the tools to select, activate,
deactivate, record, and configure presets.
• Space: Determine the space to which the entered preset numbers
apply. Your available choices will depend on the configured
spaces within the rack.
• The second line in the screen shows status of the currently active
preset for the selected space, or “No Active Preset” if no presets
are currently active.
Sequences
Space: 1
Sequence Inactive
Start
Seq Mode:
Single
Edit Steps