ETC Power Control Processor, Руководство по настройке

Страница: 36 / 64

30 Power Control Processor Configuration Manual
O p e n / C l o s e S e t t i n g s
The Open/Close settings allow you to program the timeclock to have a master Open and Close time
that will be available to all scheduled events.
1: Navigate to Open/Close Settings and press [Enter] ( ). The headings of Weekdays, Saturday,
and Sunday cannot be modified.
2: Press [Enter] ( ) once to navigate to the Time field. Each subsequent press of [Enter] ( )
commits the current selection and progresses to the next available selection field. Pressing
[Back]
( )
discards any changes and highlights the previous selection.
• The default value for Open is 8:00 a.m.
• The default value for Close is 9:00 p.m.
Switching Control Menu
The Switching Control menu is provided to set output levels,
check outputs, and release any set output levels. Direct access to
the “Switching Control” menu is also available by pressing the
[Control] (
) button on the user interface.
Set Levels
The Set Levels menu option allows you to select circuits by slot number and manually set them to a
level. All configured relays/breakers are listed.
• NA indicates a position that is either part of a 2-pole or 3-pole relay, or where no relay exists.
• “–” indicates the dimmer is released from or is not under Set Level control.
To set output levels:
1: Use the numeric keypad including the [and] and [thru] buttons to specify a circuit, or range of
circuits.
2: Press [Enter] ( ) to accept the selection.
3: You will now be in the value field. Type in a level value.
4: Press [Enter] ( ) to apply that level or [Back] (<) to discard it.
When you exit the “Set Levels” menu option, you will be prompted for confirmation of whether you
would like to “Release Set Levels”.
• Selecting “Yes” returns all set levels to the default value.
• Selecting “No” causes all set levels to remain until released.
Switching Control
1 Set Levels
2 Output Check
3 Release Set Levels