Menu and Configuration
21
Patch DMX Input
This editable screen allows for the DMX address of each circuit to be altered.
1:
While in the Patch DMX Input menu, select the DMX circuit number on the keypad. If applicable
use the AND or THRU keys to select multiple circuits.
2:
Wait 2 seconds for the panel to recognize the requested circuits.
3:
Press [Enter] (
).
4:
Using the keypad, type the required starting DMX address for the selected circuit or group.
• The panel will consecutively auto-fill all additional circuits within the selected group.
5:
Press [Enter] ( ) to commit the selection.
• Pressing “0” then [Enter] (
) will unpatch a circuit.
• Unpatched circuits are shown as “–”.
• For multi-pole breakers/relays, the DMX address will be shown for the first, or lowest output
of the relay.
For multi-pole breakers and relays, the DMX address lives with the first, or lowest pole. All other poles
are shown as N/A. If the breaker or relay is not configured as a multi-pole, all poles are available.
Patch sACN Input
This editable screen allows you to select the patch number for each selected circuit.
1:
While in the Patch sACN Input screen, select the circuit position number on the keypad. To select
multiple circuits, use the AND or THRU keys.
2:
Wait 2 seconds for the panel to recognize the requested circuits.
3:
Press [Enter] (
).
4:
You will now see the Address column highlighted. Use the keypad to select the starting patch
number.
5:
Press [Enter] (
) to commit the patch number selection.
6:
Press [Enter] (
) a second time to advance to the Univ column.
7:
Use the keypad or the up and down arrows to enter the desired sACN universe.
Only sACN universes that have been configured can be entered. If the number of a non-
configured universe is entered, the panel will reject the value and automatically revert to the
previous setting. For more information on configuring sACN universes, see
.
1 AND 3 THRU 6
Output DMX
1:
123
2:
124
3:
125
4:
126
5:
NA
6:
128
press
Enter
Patch DMX Input
Output DMX
1:
-
2:
124
3:
-
4:
-
5:
NA
6:
-
Patch DMX Input
Output DMX
1:
222
2:
124
3:
223
4:
224
5:
NA
6:
225
Press
222,
then
Enter
1 AND 3 THRU 6
Out Address Univ
1:
1
63999
2: 2
1
3:
3
12
4:
126
1
5:
NA
6:
1
1
press
Enter
Patch sACN Input
Out Address Univ
1:
201
63999
2: 2
1
3:
-
12
4:
-
1
5:
-
6:
-
1
press “201”
then Enter
press
Enter
Patch sACN Input
Out Address Univ
1: 201
1
2: 2
124
3: 202
1
4: 203
1
5: NA
6: 204
1
press “1”
then Enter
Содержание Power Control Processor
Страница 6: ...iv Power Control Processor Configuration Manual ...
Страница 61: ...Web UI 55 ...
Страница 62: ...56 Power Control Processor Configuration Manual ...
Страница 63: ......
